Post Construction

• A vertical chemical barrier will be established at the ground floor, both inside and outside the building.
• The objective is to create a barrier that any termite worker entering or leaving the colony must cross, ensuring their elimination.
• The building will be divided into segments, and treatment will be conducted according to an approved schedule.
• Drilling at critical points will be done with minimal damage to ground floor tiles. Hole depth will be 12” with a ½” diameter, spaced 3 feet apart.
• Chemical solution will be poured at a rate of 4-5 liters per hole.

Special Filler for Cracks:

• All cracks or crevices around wooden fixtures, walls, or floors will be filled with a special building agent made with Termisol 25EC to prevent termite ingress.

Wood Treatment:

• All wooden fixtures (door and window frames, false ceiling, paneling, etc.) will be treated with a chemical solution to prevent termite damage.
• The termiticide solution will be poured behind wooden fixtures, either by removing paneling or through drilling into the fixtures.

Concealed Wiring Treatment:

• To prevent termite movement through electrical wiring, a water-based solution will be poured into all sockets at ground level.
• A cotton swab dipped in TermiSol 25EC will be placed on the mouth of electric pipes if necessary.