Epoxy flooring work by Makhdoom Services

MAKHDOOM SERVICES · FLOOR RENEWAL

Epoxy Floor Renewal, Repair & Re-coating

Industrial epoxy floors wear with traffic, chemicals and cleaning. Many facilities plan a renewal after several years, often around five, depending on how hard the floor is used. We inspect your existing floor and recommend a spot repair, a re-coat or a full renewal with a new epoxy or PU system.

Rs 2,000 refundable visit charge — refunded/adjusted when you book the work

5-year warranty on new epoxy systems; PU and spot-repair terms are stated in the quotation.

Signs your floor needs renewal

  • Peeling, flaking or delaminating coating.
  • Cracks, chips and damaged joints.
  • Worn traffic lanes and forklift routes where the concrete shows through.
  • Stains and discolouration that no longer clean off.
  • A rough or porous surface that has become hard to clean.
  • Faded line marking and colour zones.

Why coatings peel

Common causes are moisture rising through the slab, poor surface preparation when the floor was first laid, a system too thin for the traffic, chemicals the coating was not chosen for, and normal wear over the years. Finding the cause first helps the new floor last.

How renewal works

  1. Inspection — we check adhesion, cracks, moisture and the traffic and chemicals on each area.
  2. Removal or grinding — loose and failed coating is removed; sound coating and concrete are ground to give the new system a good key.
  3. Surface repair — cracks, holes and spalled concrete are repaired with epoxy mortar; expansion joints get flexible sealant.
  4. New system — a new epoxy or PU system, with thickness chosen for your traffic, plus coving and line marking where needed.
  5. Curing and handover — about 24 hours before foot traffic and 48–72 hours before forklifts or vehicles; exact timing is in the written quotation.

Repair, re-coat or full renewal?

Small damaged patches can often be repaired locally. If the old coating is still well bonded but worn, a re-coat after grinding may be enough. Where the coating is peeling over large areas, full removal and a new system is usually the better choice. We explain the options after the inspection.

Planned around your operations

Where the site allows, renewal can be done section by section, aisle by aisle or room by room, on shutdown days or over weekends, so other areas keep working. The phasing is agreed with you before work starts.

Questions & answers

Before we visit

Get a renewal quote for your floor

Send your business type, site location, approximate area, the age of the current floor if known, what the floor carries and 3–5 close-up photos of the damaged areas on WhatsApp. We review them, arrange an inspection and send a written quotation.

We specialise in commercial and industrial floors.